10.0m Active DisplayPort v1.4 AOC Hybrid Fiber Optic Plug to Plug Cable

This active DisplayPort AOC Hybrid Fiber Optic Cable is ideally suited for transferring uncompressed video and audio data with high bandwidth over longer distances. The hybrid construction, which uses copper and fiber optic cable, prevents electromagnetic interference. This ensures a loss-free transfer along the entire length of the cable with UHD resolution of up to 8K/60Hz and bandwidths of up to 32.4 Gbps.

The use of fiber optic cable keeps the diameter of this active cable very low and gives it a very tight bending radius and low weight. It is ideal for use in homes, meeting rooms, and conference rooms as well as within buildings — and these are just a few of the possible uses.

The simple Plug and Play installation is user-friendly; just plug it in and immediately enjoy optimal image quality. It supports numerous standards such as DisplayPort 1.4, HDCP 2.2 and HDR. Some of the many audio features supported are DTS-HD Master Audio and Dolby TrueHD. Cutting edge chip technology makes it possible to transfer the full DisplayPort signal spectrum while also supporting uncompressed CED and EDID with very low latency.

• Active fiber optic data transfer with up to 32.4 Gbps - zero latency
• Resolutions of up to 8K@60Hz
• Transfers uncompressed HDMI video and audio signals over a distance of 10 m
• Compact cable with small diameter (OD 4.8 mm)
• Immune to electromagnetic interference (EMI)
• Supports HDR (High Dynamic Range)
• Supports HDCP 2.2 / EDID / CEC
• Hybrid construction with fiber optic and copper cores with gold-plated contacts
• Loss-free data transfer rate at high transmission speed

• When plugging and unplugging the cable, only grasp the plug and do not pull directly on the cable.
• Cables must not be kinked sharply or bent at tight angles, as this can damage the inner wires and lead to failures.
• Make sure that the cables are not under tensile load, as this can damage the insulation and the wires inside the cable.
• Ensure that cables are not laid in areas where they can be easily damaged mechanically.
• Cables should not be used in environments with extremely high or very low temperatures. Observe the product information on the maximum operating temperature of the cable
• Check cables regularly for visible damage such as cracks, kinks or signs of wear. Defective cables should be replaced immediately to avoid failures, short circuits or even electric shocks.