CAT6 F-UTP Outdoor Network Installation Cable (305m)

Outdoor/indoor waterproof installation cable CAT. 6 F/UTP solid copper

• Category 6 cables are made of 4 of high-performance twisted pair conductors. The cable standard provides performance of up to 250MHz and is used for Ethernet networks running at speeds up to 1 Gigabit. (AWG 23)

• F-UTP: Foiled Unshielded Twisted Pair – F-UTP cables consist of pairs of wires twisted together with an overall foil screen covering the 4 pairs of twisted pairs. This protects against electromagnetic and radio-frequency interference and crosstalk.

• PoE+: Its conductor is exclusively made of copper, and its conductivity is therefore optimal, guaranteeing the highest performance. This type of cable is recommended for PoE applications up to 60 W (PoE++).

• PE Insulation: The sheath of this cable is made of PVC lined with PE (anti-UV treated polyethylene), for outdoor or indoor use. This cable is intended for the connection of outdoor equipment, such as video surveillance cameras or wifi access points, and can also be used indoors in humid environments.

• This cable is suitable for installations in dry, wet areas or outdoors (NOTE: this cable can be buried only through conduits, not directly in the ground.)

• Complies with ANSI/TIA 568 and ISO 11801 standards

Technical specifications:

• 4 pairs
• Category: CAT. 6
• Frequency: 250 MHz
• Impedance: 100 ohms
• Conductor: 100% oxygen-free copper
• AWG: 23/1 strand (0.56 mm)
• Shielding: general by aluminum foil + ground drain
• Cross pair separator
• Outer diameter of the cable: 8.4 mm
• Outer diameter of the wires: 1.15 mm
• Insulation of the pairs: HDPE (high density polyethylene)
• NVP: 72%
• Wiring standard: EIA / TIA 568 C2 - ISO /IEC 11801 - EN 50173
• Sheath: double inner PVC sheath and outer PE (anti-UV treated polyethylene)
• Colour: black
• Storage and use temperatures: -20° to +60°C