4K Wireless HDMI Receiver (RX) additional unit for DS-55328

Description

With this additional receiver unit, you can extend the 4K Wireless HDMI KVM Extender Set (DS-55328) for up to 4 receivers (output devices). Distribute your AV signals wirelessly on up to 4 screens.

Technical details

• Point-to-multipoint connection - 1x transmitter (source) + up to 4x receivers (output device)
• Touch Screen Back Control - Supports touch panels (via USB connection on the receiver)
• Wireless channel: IEEE 802.11.b/g/n/ac
• Frequency band: Dual Band, 2,4/5G
• Compression: H.265
• Latency: approx. 100 ms
• AES 128 bit encryption
• Authentication protocol: WPA2 (WPAS-PSK / WPA2-Enterprise)
• HDMI version: 2.0
• Receiver unit connections:
• 1x HDMI output (output device, 4K/60Hz max.)
• 2x USB-A input (connection of mouse/keyboard/touch panel)
• 1x USB-C input - connection power adapter (5V/2A)
• 1x Reset button
• 1x On/Off switch
• Housing: Metal
• Colour: black
• Dimensions: W 15.4 x D 7.75 x H 2.1 cm
• Weight: 330 g
• Power consumption (1 unit): approx. 5W
• Operating temperature: 0-40 °C
• Manufacturer’s notice: The transmission distance with a restricted visual range cannot be determined generally and depends on the specific circumstances where installed - Walls, glass etc. shorten the signal range or cause signal losses

Package content

• 1x Receiver unit
• 1x USB power adapter (5V/2A)
• 1x USB-A to USB-C cable (1.5 m)
• 1x HDMI connection cable (1.5 m)
• 1x QIG