Digitus LAN / PoE Network Cable Tester for RJ45 / RJ11 / BNC

The LAN tester makes it easy to identify the correct PIN assignment of 10Base-T, 10Base-2, RJ45/TM11 modular cables as well as 258A, TIA-568A/568B and token ring cables by comparing the outgoing cable end with the corresponding receiving cable end. With the remote tester, you can test cables that are installed at a different location, for instance in wall distributors or patch fields. Easy identification of cabling is guaranteed.

Future-oriented standards and high-end quality for your network.

• Check network cables quickly and easily
• Loop test, remote test, PoE test
• includes adapter for BNC cable tests
• Read results easily via LED indicators
• Automatic or manual test possible
• with hard shell case

• Product dimensions: (H x W x D)
  • Main device: 80 x 55 x 25 mm
  • Remote: 80 x 25 x 25 mm
  • Hard shell case: 46 x 180 x 120 mm

• 1x main device
• 1x remote device
• 1 x PoE testing device
• 2x BCN adapter cable
• 1x BNC plug/plug adapter
• 3x RJ45 to RJ11 adapter
• 1 x user manual
• 1 x hard shell case

• Avoid using network test devices in damp or wet environments, as this can lead to short circuits or electric shocks.
• Only use the device in the specified operating temperature ranges and avoid extreme humidity.
• Never connect the tester to unauthorized sources or excessively high voltages. Overloading can damage the device or lead to dangerous situations.
• Check the respective tools for obvious defects before each use.
• Remove damaged hand tools from use immediately and repair them professionally or replace them if necessary.
• Clean tools after use.
• Store safely and clearly.